How To Use A Soaker Hose ?How To Use A Soaker Hose

logo
 
 
Gardener Resource

Cost-Of-Drip-Irrigation      Drip irrigation system is also known as trickle irrigation or micro-irrigation. It is useful for watering specific areas in the garden without letting the surrounding areas get wet. The system basically directs the water slowly to the roots of the plants by way of a plastic tube or a pipe. More..


 
 

How To Use A Soaker Hose ?


If you are looking for a cost efficient and easy way to water your garden, then think about installing a soaker hose. This is an excellent way to water all the plants in your garden without using water unnecessarily. A soaker hose ensures that the water reaches the roots of the plants. The traditional sprinklers tend to waste a lot of water to runoffs and evaporation, while hand watering plants is time consuming.


However, by having a soaker hose, you will not waste water, you will save money on your water bill and you will not have to stand in the garden hauling the hose around. You might be wondering How To Use A Soaker Hose ?. Well, think no more. Just read on to find out.

Soaker hose is invariably made from recycled rubber. However, you can even make a soaker hose using a normal garden hose. However, make sure that the length of the hose is less than fifty feet. If you use a longer hose, then water will not get distributed evenly towards the end of the hose.

Place the hose on the ground. Though many will tell you bury the hose, it is not advisable. Make sure the hose is laid out in a straight line without any twists or curves. The hose should be around 1 to 2 inches away from the plant base. It is best to lay the hose along the edge of the vegetable or flower bed.

When you buy the soaker hose, it will come in a coiled package. This means that when you open it, it will keep curling back into a coil. In order to prevent this, pin the hose to the ground using U-shaped metal pins that are used for landscaping. The pins should be fixed every twenty-four inches.

Once you have fixed the hose, cover it with mulch. Not only will the mulch help to keep the moisture in the soil, it will also disguise the hose and keep your garden from looking ugly or unkempt.

Now connect one end of the soaker hose to the water source. Turn on the water at a slow or moderate pressure. Allow the water to run for around thirty minutes and then check how much the soil has soaked. Usually you should allow the water to soak in around eight to twelve inches each time you use a soaker hose.

More Articles :

How To Use A Soaker Hose

 

 Sponsored Links :
 

 
Is Lawn Fertilizer Safe With Dogs ?
How Does Fertilizer Work ?
Commercial Manufacturing Of Organic Fertilizer
Beginning Flower Gardening
How To Measure Plant Nutrients
Indoor Gardening Design Ideas
Methods To Start A Hydroponics Garden
What Are The Pest And Diseases Of Hydroponics ?
Hydroponic Nutrient Tablets
Rain Water Irrigation System For Gardens
Water Quality Criteria For Irrigation Water In Usa
EPA Guidelines For Arsenic In Irrigation Water
Organic Farming
Organic Food
Organic Vagetable
How Do Pesticides Kill Bugs ?
Harmful Effects Of And Pesticides
Pesticide Epa Policy And Greenhouse Effect
Landscaping With Stone Techniques
Landscaping Or Terracing A Steep Hill
Ground Effects Lawncare And Landscaping
Farming And Soil Erosion
How Is The Problem Of Floods Made Worse By Soil Erosion
Monitoring Soil Erosion
Processes Of Soil Erosion
Ways To Prevent Soil Erosion
What Is Soil Erosion
line
bottom
 •Home   •Gardening TipsFertilizer  PesticideLandscaping   •Hydroponics   •Gardening Pest
Garden Tool •Herb GardeningIrrigation  •Privacy Policy  •Contact


© 2010 Onlinegardenertips.com, All Rights Reserved.
( How To Use A Soaker Hose ? )